This adds a new system preference to control the amount of boost. The default of 0 will act as before this patch.
You can add any positive number, or a number between 0 and 1 for negative boost
To test:
1 - Add a record with
245 $a novel
2 - Add a record with
245 $a A novel : $b about things / $c by me
3 - Search for: novel
4 - Search for: a novel
5 - Apply patch, restart all
6 - Repeat searches, note exact titles are boosted
7 - Test with more titles as you are able
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
This patch removes Baker & Taylor integration following the shutdown of
the company.
To test, apply the patch, run the database update, and restart all.
- In the staff interface go to Administration -> System preferences and
search for 'Baker.' There should be no results.
- If necessary enable at least one cover image service, e.g.
AmazonCoverImages, OpacCoce, GoogleJackets, etc.
- Log in to the OPAC and confirm that cover images display correctly on
these pages:
- Search results
- Bibliographic detail page
- Shelf browser
- Your summary -> Checked out
- Checkout history
- Recent comments
- Lists
Sponsored-by: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
This patch adds a new PatronAgeRestriction, which acts in the same way
PatronSelfRegistrationAgeRestriction (a restriction on the maximum age
of a borrower), except for the intranet. It will also act as the
maximum age restrictor on the OPAC, in the event that the
PatronSelfRegistrationAgeRestriction is not set.
To test:
== APPLY PATCH ==
a) updatedatabase
b) Set the PatronAgeRestriction syspref to 20, set the
PatronSelfRegistrationAgeRestriction to 30
c) On the OPAC, try to create or modify a patron whose age is 35 years
*) Note the error message presented, suggesting the age exceeds the
maximum
d) On the OPAC, try to create or modify a patron whose age is 25 years
*) Note the submission succeeds
e) On the staff client, try to create or modify a patron whose age is
25 years *) Note the error message presented, suggesting the age
exceeds the maximum
f) Set the PatronSelfRegistrationAgeRestriction to empty
g) On the OPAC, try to create or modify a patron whose age is 25 years
*) Note the error message presented, suggesting the age exceeds
the maximum
h) On the OPAC, try to create or modify a patron whose age is 19 years
*) Note the submission succeeds
i) Set the PatronAgeRestriction to empty
j) On the staff client, try to create or modify a patron whose age is
75 years
*) Note the submission succeeds
k) On the OPAC, try to create or modify a patron whose age is 75 years
*) Note the submission succeeds
== SIGN OFF ==
Sponsored-by: Cheshire West and Chester Council
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
This follow-up patch addresses feedback from the QA process:
1. System preference naming consistency
Renamed the following preferences to remove "OPAC" prefix and align
with the FineNoRenewals naming convention:
- OPACFineNoRenewalsIncludeCredits → FineNoRenewalsIncludeCredits
- OPACFineNoRenewalsBlockAutoRenew → FineNoRenewalsBlockAutoRenew
2. Self-checkout backward compatibility
Added new system preference FineNoRenewalsBlockSelfCheckRenew to
control whether fine limits block renewals via web-based self-checkout.
Previously, OPACFineNoRenewals did not block self-checkout renewals.
With the rename to FineNoRenewals, this behavior changed. The new
preference defaults to "0" (don't block) to maintain backward
compatibility, allowing sites to opt-in to blocking self-checkout
renewals when patrons exceed the fine threshold.
Test plan:
1. Run prove t/db_dependent/Circulation.t - all tests should pass
2. Run prove t/db_dependent/api/v1/checkouts.t - all tests should pass
3. Verify system preferences are correctly renamed in the admin interface
4. Test self-checkout renewals with FineNoRenewalsBlockSelfCheckRenew
set to 0 (default) - renewals should work even when fines exceed limit
5. Test self-checkout renewals with FineNoRenewalsBlockSelfCheckRenew
set to 1 - renewals should be blocked when fines exceed limit
Sponsored-by: OpenFifth <https://openfifth.co.uk/>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
This patch adds new syspref AllowFineOverrideRenewing. It allows
staff to renew items for patrons whose fines are over limit set
in syspref FineNoRenewals. Otherwise renewing is prevented. If
renewing items is allowed staff is still required to confirm
if they really want to renew items for the patron.
To test:
1. Apply this patch, update database and restart all services.
2. Find patron with fines over limit set in FineNoRenewals and
renewable items.
=> Note that renewing is prevented with message "Cannot renew,
the patron has a debt of..."
3. Set syspref AllowFineOverrideRenewing as "Allow".
=> Note that items can now be renewed and renewing them displays
confirmation pop-up.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-of-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
OPACFineNoRenewals no longer applies just to OPAC.
To avoid confusion rename it as FineNoRenewals and
also rename all occurences in code.
To test, confirm everything works as described in
previous test plans.
Also prove t/db_dependent/Circulation.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Shi Yao Wang <shi-yao.wang@inlibro.com>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In the previous tests we had:
$b =~ s/_/ZZZ/g; # mysql sorts underscore last, if you modify this qa-test-tools will need adjustments
But this is wrong, try:
select variable from systempreferences;
and confirm that hide_marc is before hidelostitems and that
intranet_includes is before IntranetAddMastheadLibraryPulldown
We will deal with qa-test-tools once this is pushed.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
In vim `:%s/^\(('[^']*', \?'[^']*'\).*/\1),/`
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
This patch alters the items_last_borrowers table to allow for NULL borrowers
It also adds two new system preferences to allow controlling the anonymization of items_last_borrower data
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Peter Moore <peter@mrcpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds the 'OPACTableColExpandedByDefault' system preference,
disabled by default, which controls whether responsive datatable rows
are expanded or not. This work has been performed after recommendations
from a recent accessibility audit.
TO TEST:
a) set 'OpacLocationBranchToDisplay' to both
b) search the OPAC for history, select first result
c) zoom your browser in to maxiumum, scroll down to holdings table
- notice how the rows are collapsed by default, with '+' visible
**apply patch**
e) refresh details page, notice how the behaviour is currently unchanged
f) change new 'OPACTableColExpandedByDefault' syspref to 'Expand'
g) return to OPAC details page, refresh, zoom in
- notice how the rows are now expanded by default, with '-' visible
**sign off**
Sponsored-by: British Museum
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The TitleHoldFeeStrategy system preference was added in the database
update script (251200023.pl) but was missing from sysprefs.sql,
causing issues for fresh installations that don't run the update
script.
This preference likely disappeared during rebases. Adding it in the
correct alphabetical position between 'timeout' and
'todaysIssuesDefaultSortOrder'.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 41624: Revert "Bug 35211: (QA follow-up) Fix counting"
This reverts commit 97a022054d.
Bug 41624: Revert "Bug 35211: (QA follow-up) fix display of other results tab and move template toolkit logic outside of script array"
This reverts commit c4c2a4b235.
Bug 41624: Revert "Bug 35211: Removed local items from group tabs and removed group items from other holdings tab"
This reverts commit 124c6c8670.
Bug 41624: Revert "Bug 35211: Fixed group tab item building logic"
This reverts commit 23eb2dbd39.
Bug 41624: Revert "Bug 35211: Fix tab building"
This reverts commit f438535b5c.
Bug 41624: Revert "Bug 35211: Set SeparateHoldingsByGroup to separate based on SeparateHoldingsBranch syspref"
This reverts commit d2a0527d86.
Bug 41624: Revert "Bug 35211: Fixed count on logged in holdings"
This reverts commit 96c7eb3459.
Bug 41624: Revert "Bug 35211: Reordered tabs in Holdings Table and fixed group tabnames"
This reverts commit 5c2b0fd496.
Bug 41624: Revert "Bug 35211: Separate group holdings into individual tabs"
This reverts commit 08045c8009.
Bug 41624: DB update to remove the pref
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates the definition of the OAI-PMH:DeletedRecord
preference in sysprefs.sql, correcting the switched options and
explanation columns.
To test, apply the patch and run updatedatabase. Check that the database
has been updated correctly:
SELECT `options`, `explanation` FROM `systempreferences` WHERE
`variable` = 'OAI-PMH:DeletedRecord';
Sponsored-by: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <bibliothek@th-wildau.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Trevor Diamond <trevor.diamond@mainlib.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
* free => Free
* options=NULL where type=Free
* fix options and type for ArticleRequestsSupportedFormats
* fix more explanation and options
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There are 72 occurences for the 'Integer' type, and 8 for 'integer'.
Tests fail because of `StoreLastBorrower` already, so fixing them all for good.
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the discrepancies and put in sync the
systempreferences table for new and upgraded installations.
Main changes:
* Set options to NULL when options=""
* Fix explanation when different
* Fix wrong order (some rows had options=explanation)
* Fix wrong type "Yes/No" => "YesNo"
* Remove StaffLoginBranchBasedOnIP: both StaffLoginLibraryBasedOnIP and
StaffLoginBranchBasedOnIP are in the DB for upgraded installs
* Remove the 'showsql' from the test. If we need it back then it must be
a maintenance script.
* Improve the tests:
* Compare sysprefs.sql and the DB content for options, explanation and type
* Catch type not defined
* Catch incorrect YesNo values (must be 0 or 1)
Later:
* Add a C4::Installer sub to add new syspref:
add_pref(
{
variable => $variable,
value => $value,
options => $options,
explanation => $explanation,
type => $type
}
);
* Clean 'type' and make it an ENUM
* Make it easy to run the test for devs (should be in xt but we need it
in t/db_dependent for packages - FIXME?)
* Run the tests on upgraded installs on CI
Test plan:
0. Apply the "tests" patch only
1. prove it
=> It fails loudly
2. Apply the DB change and run updatedatabase, prove the tests
=> they pass
3. Test upgraded installs:
* checkout v24.05.00 (the version we use for Jenkins'
Koha_Main_MariaDB_update job)
* reset_all
* checkout the branch with this patchset
* updatabase
* prove t/db_dependent/check_sysprefs.t
=> Should be green
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Change FutureHoldsBlockRenewals from type 'Integer' to 'YesNo'
for consistency with other boolean preferences in Koha (e.g.,
AllowHoldDateInFuture, OPACAllowHoldDateInFuture).
While the preference functionally works as Integer due to the
.pref file defining the choices, YesNo is the established
convention for binary system preferences.
Test plan:
1. Apply this patch
2. Run the database update
3. Verify the preference appears correctly in system preferences
4. Verify the preference still functions properly with tests:
prove t/db_dependent/Circulation.t :: "CanBookBeRenewed | future holds"
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
[1] Run install or upgrade (updatedatabase.pl). Verify that pref was added to database.
* perl -MC4::Context -e'print C4::Context->preference('FutureHoldsBlockRenewals'),"\n"'
* You should see a zero printed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds the ApiKeyLog system preference to control logging
of API key actions (creation, deletion, revocation, activation).
The preference follows the same pattern as BorrowersLog and other
logging preferences.
Test plan:
1. Apply patch and run database update
2. Go to Administration > System preferences > Logs
3. Verify ApiKeyLog preference appears with Yes/No options
4. Verify default value is 'Don't log' (0)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This implements support for the new EDItEUR/BiC GIR:LSL (Library Sub-Location)
field to complement the existing GIR:LSQ (Library Sequence) functionality,
allowing flexible mapping of both fields to location and collection item fields.
Changes:
- Add LSL mapping to GIR field extraction in Koha::Edifact::Line
- Update gir_segments() in Koha::Edifact::Order to handle both LSL and LSQ preferences independently
- Add validation functions in Koha::EDI using Koha::AuthorisedValues for location/collection codes
- Add EdifactLSL system preference for independent LSL field mapping
- Update EdifactLSQ to include empty option for ignore functionality
- Add admin interface configuration for LSL preference
The implementation provides maximum flexibility:
- EdifactLSQ can be set to: location, ccode, or empty (ignore)
- EdifactLSL can be set to: location, ccode, or empty (ignore)
- Both fields can be mapped independently or to same target field
- Validation ensures codes exist in LOC/CCODE authorised values
- Maintains full backwards compatibility with existing LSQ-only setups
Test plan:
1. Apply both patches
2. Update database: installer/data/mysql/updatedatabase.pl
3. Verify new system preferences in Administration > System preferences > Acquisitions:
- EdifactLSQ: "Map EDI sequence code (GIR+LSQ) to Koha Item field"
- EdifactLSL: "Map EDI sub-location code (GIR+LSL) to Koha Item field"
4. Create test authorised values:
- LOC category: Add values like FICTION, REFERENCE
- CCODE category: Add values like ADULT, CHILD
5. Set preferences to test combinations:
- EdifactLSQ=location, EdifactLSL=ccode
- EdifactLSQ=ccode, EdifactLSL=location
- EdifactLSQ=location, EdifactLSL="" (empty)
6. Process EDIFACT messages containing GIR+LSL and GIR+LSQ segments
7. Verify items created with correct location/ccode values per preferences
8. Test invalid codes generate appropriate error messages
9. Confirm existing LSQ-only configurations continue working unchanged
10. Run: prove t/Edifact.t t/db_dependent/Koha/EDI.t t/db_dependent/Koha/Edifact/Order.t
Sponsored-by: Westminster City Council <https://www.westminster.gov.uk/>
Sponsored-by: Royal Borough of Kensington and Chelsea <https://www.rbkc.gov.uk/>
Sponsored-by: OpenFifth <https://openfifth.co.uk/>
Signed-off-by: Hannah Dunne-Howrie <hdunne-howrie@westminster.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test Plan
1. Before applying, navigate to administration->system preferences ->
UpdateNotForLoanStatusOnCheckout
2. Observe the language in the description "When an item is checked out,
if the not for loan value on the left matches the items not for loan
value it will be updated to the right-hand value"
3. Apply the patch
4. Navigate to administration->system preferences ->
UpdateNotForLoanStatusOnCheckout
5. Observe the language in the description has been updated to "When an
item is checked out, if its not for loan value matches the value on
the left, then the items not for loan value will be updated to the
value on the right"
6. Do a reset all and confirm the language is correct
Signed-off-by: Andrew Auld <andrew.auld@openfifth.co.uk>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Added SeparateHoldingsByGroup system preference
Adds new tabs to Holdings table if preference is enabled
Separates by library groups
Test Plan:
1. Apply patch, restart_all, updatedatabase
2. Koha Administration -> System preferences -> SeparateHoldingsByGroup
3. Change to "Separate holdings by library group in subsequent tabs..." and Save
4. Koha Administration -> Library Groups
5. Create multiple library groups and check the 'Use for staff search groups' box.
6. Add your logged in library to each group and other libraries to each group.
7. Do catalog searches where the location of the item is a library in a library group
8. Notice tabs in the Holdings table for each library group if it contains a library that has the item
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The Koha Manual has been translated into Greek:
https://koha-community.org/manual/latest/el/html/index.html
However, 'Greek' is missing from the list of languages
available in the 'KohaManualLanguage' System Preference.
This patch fixes that.
Test plan:
1) Without the patch, visit Administration > System preferences >
Enhanced content, and under the 'Manual' section notice that
'Greek' is missing from the options of the 'KohaManualLanguage'
syspref dropdown.
2) Apply the patch, and run updatedatabase.pl
The 'KohaManualLanguage' dropdown should now list 'Greek'.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch restores the previous perl sorting to restore speed. For English language libraries
this will be correct in most instances, and is much more performant.
To test:
1 - Apply patch, update database
2 - Perform some searches, note ordering of facets
3 - Update system preference 'FacetOrder' to 'simple alphabetical'
4 - Peform some searches, note ordering of facets, should be correct unless you have unicode characters
5 - Sign off
NOTE: Benchmarks attached as a comment, you can also enable NYTProf and view results for yourself:
https://wiki.koha-community.org/wiki/Profiling_with_Devel::NYTProf#NYTProf_with_Plack
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Adds a new system preference ShowPatronFirstnameIfDifferentThanPreferredname
to allow a patron's firstname to be shown in search results when
different than their preferred name.
Sponsored-by: Westlake Porter Public Library <https://westlakelibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Run install or update
Check new preference under Administration
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Run updatedatabase.pl
Check ListOwnershipUponPatronDeletion on Patron preferences tab.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We currently have a sysprefs named "Elasticsearch*" and some name only "ES*". This patch unifies the names to always start with "Elasticsearch".
Test plan:
* Start koha-testing-docker, open the staff interface and go to Administration.
* Enter "Elasticsearch" into the System Preference search box and click "search"
* You will find a bunch of sysprefs
* Now search for "ESPreventAutoTruncate", which should find one match
* Apply the patch
* run (in ktd) the script `updatedatabase`
* You should see output like
DEV atomic update /kohadevbox/koha/installer/data/mysql/atomicupdate/bug_39526_unify_syspref_variable_names_for_elasticsearch.pl [09:35:03]: Bug 39526 - Unify system preference variable names for Elasticsearch
Renamed system preference 'ES..' to 'Elasticsearch..'
* Go again to to sysprefs and search again for "Elasticsearch"
* you should now find "ElasticsearchPreventAutoTruncate"
* Search for "ESPreventAutoTruncate", which should show "No system preferences matched your search for .." (and the list of ALL sysprefs)
Please note that the qa script explains about installer/data/mysql/mandatory/sysprefs.sql, but the last line is not touched by this patch, so not sure why this happens.
Sponsored-by: HKS3
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes the Booking module dependant of a new YesNo syspref: EnableBooking
To do this, I tried and get all changes using the graph of Bug 29002 and
got interrested in every tt change to make changes on this depend on the
new syspref. File inside the booking module should not be amended.
Here are the files I found relevant for each patch
Bug 37737:
- koha-tmpl/intranet-tmpl/prog/en/includes/patron-detail-tabs.inc
- koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt
Bug 37736:
- koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation-home.tt
Bug 29002:
- koha-tmpl/intranet-tmpl/prog/en/includes/cat-toolbar.inc
- koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/ISBDdetail.tt
- koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/MARCdetail.tt
- koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/detail.tt
- koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/imageviewer.tt
- koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/labeledMARCdetail.tt
- koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/moredetail.tt
TEST PLAN:
1 - Set "Bookable = 1" on a given item
2 - Make sure you know where are located
- The field bookable on exemplaries
- The button "Place booking" in item toolbae
- The link "Bookings (0)" in item menu
3 - Apply patch and update database
4 - Check that every field listed in 2 - is still present
5 - Set the syspref "EnableBooking" to "Disable"
6 - Check that every field listed in 2 - is still present
7 - Browse Norme, ISBD, Marc, Items tabs + pages imageviewer.pl, labeledMARCdetail.pl and check that nothing is broken
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 15516: Add ability to create and view hold groups from OPAC
This patch adds a "Treat as hold group" to opac-reserve.pl,
which lets OPAC users create a hold group which can include
1+ bibs and either bib-level holds, or item-level holds, or both.
This patch shows the item-level and bib-level holds in a hold group
for the user's holds in the OPAC. This includes both the opac-user.pl
page and the self-checkout hold display.
Bug 15516: (follow-up) Only show hold groups for multi hold in OPAC
Bug 15516: (follow-up) Only show hold groups for multi hold in staff interface
Bug 15516: Add 'DisplayAddHoldGroups' system preference to toggle ability to add titles to hold groups
These patches add the ability to create hold groups across multiple bibs in the staff interface or OPAC.
These hold groups are fulfilled by the first item checked in across the hold group.
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - confirm whether or not NewsLog is enabled on your system
2 - apply patch, updatedatabase, restart_all
3 - search system preferences, confirm you now have
AdditionalContentLog rather than NewsLog and that the new
description is accurate
4 - confitm AdditionalContentLog shows the value you previously had for
NewsLog
5 - go to Tools > Log Viewer
6 - confirm the checkbox here is labeled "Additional Content", that it
correctly reflects the syspref value, and that it links to the
syspref
7 - with AdditionalContentLog enabled, created/edit/delete news, HTML
customizations, and pages. confirm they log
8 - with AdditionalContentLog disabled, created/edit/delete news, HTML
customizations, and pages. confirm they don't log
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
No idea why it was not NULL in DB when I did my first SELECT
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Some sysprefs have NULL as their default value, and systempreferences.value allows NULL values.
However C4::Context->set_preference does not unset a syspref if "undef" is passed.
Additionally some of the sysprefs that have NULL as default will generate warnings in the logs (and test suite output).
opac/opac-suggestions.pl: for my $f ( split( /\s*\,\s*/, C4::Context->preference("OPACSuggestionUnwantedFields") ) ) {
Here is the current list:
+-------------------------------+-------+
| variable | value |
+-------------------------------+-------+
| decreaseLoanHighHoldsDuration | NULL |
| decreaseLoanHighHoldsValue | NULL |
| ILLHiddenRequestStatuses | NULL |
| ILLOpacbackends | NULL |
| ILLSendStaffNotices | NULL |
| ListOwnerDesignated | NULL |
| MarcFieldDocURL | NULL |
| MaxFine | NULL |
| OPACSuggestionUnwantedFields | NULL |
| ReportsExportLimit | NULL |
| SerialsSearchResultsLimit | NULL |
+-------------------------------+-------+
Test plan:
Code review required here, please confirm the above and that the
different occurrences do not use "undef" as a value.
Note that some tests now do not longer generate warnings
(eg. t/db_dependent/selenium/opac_ill_requests.t)
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This follow-up adds two major enhancements to the locale-based facet sorting
implementation:
1. **System Preference Integration**
- Adds FacetSortingLocale system preference for configurable locale selection
- Dynamically detects available system locales using Koha::I18N
- Provides user-friendly dropdown with locale descriptions
- Supports both Elasticsearch and Zebra search engines
2. **Zebra Search Engine Support**
- Extends locale-based sorting to Zebra (in addition to existing Elasticsearch)
- Implements _sort_facets_zebra() function in C4::Search
- Maintains consistent Unicode-aware sorting behavior across search engines
Key Features:
- Dynamic locale detection via Koha::I18N::available_locales()
- Proper module architecture with comprehensive unit tests
- Clean fallback chain: preference → system LC_COLLATE → default
- Admin UI integration in System Preferences → I18N/L10N
- Universal facet sorting for international library systems
Test plan:
1. Apply patch and restart services
2. Install/run database update
3. Navigate to Administration → System Preferences → I18N/L10N
4. Verify "Sort facet names using" dropdown shows available system locales
5. Test facet sorting with different locales and both search engines
6. Run: prove t/Koha/I18N.t t/Koha/SearchEngine/Elasticsearch/Search.t t/db_dependent/Search_FacetSorting.t
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Some web-browsers now only allow HTTPS, we should change links in
templates with SSL :
https://schema.koha-community.org, https://wiki.koha-community.org ...
Test plan :
Just look patch to check http > https
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch moves the IntranetReportsHomeHTML system preference into
HTML customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the IntranetReportsHomeHTML
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from IntranetReportsHomeHTML is now stored there.
- The HTML customization entry form should offer
IntranetReportsHomeHTML as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the IntranetReportsHomeHTML HTML customization and add unique
content to the "fr-FR" tab.
- Go to the reports home page. You should see the
content you added to the IntranetReportsHomeHTML HTML
customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"IntranetReportsHomeHTML." It should return no results.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Ray Delahunty <lib-systems@arts.ac.uk>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
- Update the dbrev to use say_success, and make dbrev and installer
consistent
- Change error div in moredetail.tt from info to warning
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. APPLY PATCH, updatedatabase, and restart_all
2. Search for the system preference, PreventWithDrawingItemsStatus
3. Select both in transit and checked out, then save
4. Find an item and put it in transit.
5. Now from the item detail page, go to manage items > edit item
6. Using the item that was put in transit, attempt to change the status to withdrawn.
7. You should see an error at the top of the page 'In transit item cannot be withdrawn.' Make sure the item did not get marked as withdrawn.
8. Using a different item, do a checkout
9. Now from the item detail page, go to manage items > edit item
10. Using the checked out item, attempt to change the status to withdrawn.
11. vYou should see an error at the top of the page 'Onloan item cannot be withdrawn.' Make sure the item did not get marked as withdrawn.
12. Now, using the in transit item, go to the items tab. ( catalogue/moredetail.pl?biblionumber=x )
13. Under Statuses, attempt to withdraw the item.
14. You should see an error near the top of the page "Cannot withdraw item in transit".
15. Now, using the checked out item, go to the items tab. ( catalogue/moredetail.pl?biblionumber=144 )
16. Under Statuses, attempt to withdraw the item.
17. You should see an error near the top of the page "Cannot withdraw checked out item.".
18. Using both the in-transit and checked out item, attempt to modify the status through batchMod.
19. Ensure that the items are not being updated to withdrawn.
20. Turn off PreventWithDrawingItemsStatus system preferece.
21. Going through each of the steps again, except this time your items should successfully withdraw.
prove t/db_dependent/Koha/Item.t
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>