To test:
Apply this patch with all of the others
run the updatedatabase, it should work
install a new Koha, this pref should be installed and look fine in the
interface.
Check the syspref, make sure the text looks ok and makes sense.
Bonus points:
for checking to make sure PROC: _PERM_ appears in the new
pereference if InProcessingToShelvingCart was set
for checking to make sure _ALL_: CART appears in the new preferenec if ReturnToShelvingCart was previously set.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new syspref "UpdateItemLocationOnCheckin" which
accepts pairs of shelving locations. On check-in the items location is
compared ot the location on the left and, if it matches, is updated to
the location on the left.
This preference replaces ReturnToShelvingCart and
InProcessingToShelvingCart preferences. The update statement should
insert values that replciate these functions. Note existing
functionality of all items in PROC location being returned to
permanent_location is preserved by default. Also, any items issued from
CART location will be returned to their permanent location on issue (if
it differs)
Special values for this pref are:
_ALL_ - used on left side only to affect all items
_BLANK_ - used on either side to match on/set to blank (actual blanks
will work, but this is an easier to read option)
_PERM_ - used on right side only to return items to permanent location
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateitemLocationOnCheckin
to the following (assuming sample data):
NEW: FIC
FIC: GEN
4) Create an item, set its location to NEW
5) Check in the item, note its location is now FIC
6) Check in the item again, note its location is now GEN
7) Check in the item again, note its location remains GEN
8) Test using _ALL_, _BLANK_ and _PERM_ for updates
9) Try entering various incorrect syntax in the pref and note you are warned
Sponsored by:
Arcadia Public Library (http://library.ci.arcadia.ca.us/)
Middletown Township Public Library (http://www.mtpl.org/)
Round Rock Public Library (https://www.roundrocktexas.gov/departments/library/)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch implements a Koha news system replacement of the OpacNavRight
system preference. The changes to koha-news.tt enable the selection of
"OpacNavRight" as a location for the content. opac-main.pl is modified
to ensure that the user's selected language is passed to the template
for use by the KohaNews plugin.
The database update process takes the contents of Koha's OpacNavRight
system preference and adds it to the Koha news system. The OpacNavRight
system preference is then removed from the database.
When the new entry is added to Koha news, the language is set based on
the top selected language in the "opaclanguages" preference. The entry
is added to "All libraries" without an author, title, or expiration
date.
Note that this patch doesn't change the way OPAC news is displayed. I
think it's best to keep existing markup and code for that since it
handles details like branch selection and RSS.
To test, apply the patch and run the database update.
- In the staff client go to Tools -> News and confirm that there is now
an entry with the location "OpacNavRight_en" (assuming an "en"
English interface).
- Confirm that the previous contents of OpacNavRight were added
correctly.
- Go to Administration -> System preferences -> OPAC and verify that
the OpacNavRight preference has been removed.
- In the OPAC, confirm that the correct content is displayed in the
region previously defined in the OpacNavRight system preference.
- Test that the language and library-specific nature of news items is
reflected in the behavior of this content area:
- Define different text based on language and location. Confirm that
switching translations and logging in to the OPAC both trigger the
correct display of different content.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Removes the OpacHiddenItems.txt file from Koha as this is not
accessible for most people and replaces it with links to the wiki
page like it's already done from the system preference editor.
For reporting and the initial patch
Thanks-to: Jane Sandberg <sandbej@linnbenton.edu>
To test:
- Changes are invisible from the GUI
- Apply patch and run database update
- SELECT * FROM systempreferences WHERE variable = "OpacHiddenItems";
- Verify the description has the wiki link
- Verify that docs/opac/OpacHiddenItems.txt has been removed
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some libraries don't want to force the librarians to manually confirm
each checkout when the item is checked out to another. Instead, they
would prefer to be alerted after the fact.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable the new syspref AutoReturnCheckedOutItems
4) Check an item out to a patron
5) Check the same item out to another patron
6) Note you are not prompted to confirm the checkout,
but are instead alerted that is had been checked out to another patron!
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: BWS Sandboxes <ByWaterSandboxes@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The idea of this development would be to match the syspref 'OPACSearchForTitleIn' but
for populating the search headers (#moresearches) on the opac page to allow staff to
easily add links without jQuery.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Update the new OpacMoreSearches system preference to include the following line:
<li><a href="https://duckduckgo.com/">Duck Duck Go</a></li>
4) Browse to the OPAC
5) Note your new link displays in the "moresearches" area of the OPAC.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds three new prefs:
- UnsubscribeReflectionDelay
- PatronAnonymizeDelay
- PatronRemovalDelay
Test plan:
Run upgrade.
Check patrons pref page. Look under Privacy.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I am not sure the correct answer - for upgraded installs the pref was
set to date, which changed behaviour
For new installs the pref was unset, behaved as if 'exact_time' so we
shouldn't change behaviour?
If the perceived default is date then the code should be changed, or
this shouldn't be a pref at all?
To test:
1 - Have a new system missing this pref
2 - Note when searchign the pref in staff client if appears as 'date'
3 - Check the db to confirm value is 'NULL'
4 - Apply patch and run update
5 - Pref is now set to 'exact_time'
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Pod coverage for 'NAME'.
Moved sysprefs in order and moved semicolon to last line.
Replaced tab indentation with spaces.
Added "Swedish service for spellchecking" to the syspref description.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Added another syspref for the url of the Libris API
Added sysprefs to syspref.sql
Please test the 2 patches together
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Get a list of itemnumbers or barcodes
2 - Set MaxItemsToProcessForBatchMod to less than this number of items
3 - Attempt to batch edit, you arent allowed
4 - Set MaxItemsToProcessForBatchMod to some hugh number like 60000
5 - Try a list of as many items as possible 30000 was good for me (they
should exist in your system)
6 - Try to batch edit, system will timeout on displaying these items
7 - Apply patch, update database
8 - Set MaxItemsToDisplayForBatchMod to 1000 (default)
9 - Try large file again, should not display items, but allow
modification, wait for this to finish
10 - SetMaxItemsToProcessForBatchMod to 1000 and try large file again
11 - Should be prohibited as before
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the syspref requirements for unmediated ILL requests. It
is a recreation of
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=66628&action=diff
which had diverged sufficiently as to make it impossible to apply.
* installer/data/mysql/atomicupdate/illunmediated_tables.sql: New
file.
* installer/data/mysql/sysprefs.sql: Add `ILLModuleUnmediated`.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/admin.pref:
Add `ILLModuleUnmediated` handling.
Signed-off-by: Stephen Graham <s.graham4@herts.ac.uk>
Signed-off-by: David Peacock <d.m.peacock@herts.ac.uk>
Signed-off-by: Jayne Maisey <j.maisey@herts.ac.uk>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch allows logging of arbitrary actions on request objects. A
chronological summary of these actions can then be displayed when
viewing a request.
This patch also adds logging of request status changes. Additional work
has been done on the BLDSS backend to log requests to the BLDSS request
status check API.
To test:
- Apply patch
- Ensure the Illlog logging preference is turned on
- Create an ILL request and perform actions on it that change it's
status.
- Navigate to the "Manage ILL request" screen
- Click the "Display request log" button
- Observe that a modal opens displaying a summary of the status changes.
Signed-off-by: Niamh Walker <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Since this bug now is dependent on Bug 20581, it should be aware of the
custom statuses provided in 20581. This patch enables logging of request
statuses being changed to custom ones. As such the test plan is
modified:
To test:
- Apply patch
- Ensure the Illlog logging preference is turned on
- Ensure you have some custom request statuses defined in the
Authorised Values ILLSTATUS category
- Create an ILL request and perform actions on it that change it's
status.
- Edit the request and change status to a custom one
- Navigate to the "Manage ILL request" screen
- Click the "Display request log" button
- Observe that a modal opens displaying a summary of the status changes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This adds the ILLOpacbackends syspref, allowing users to refine the ill
backends available to opac users for initiating ill requests
Remove default assignment for backends
We don't need a default assignment for the ILLOpacbackends assignment,
if the pref isn't set, it returns undef anyway. Also, having this
default assignment actually breaks the fetching of the preference
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also added the new pref to sysprefs.sql
Also simplified the conditional statement.
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This adds the "No, let me think about it" option.
It is the default option. If the Mana system preference
is set to "No, let me think about it", the user is warned
on the admin home page that he has not decided yet to use
or not Mana knowlegde base.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add the system preference to enable or disable Mana-KB webservice on koha.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This syspref will be used to call the reconcile_balance routing as
needed.
Sponsored-by: ByWater Solutions
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Overdrive configuration generally defaults to cardnumber, however, they
have confirmed that some libraries use usernames. We need to allow for
both scenarios.
To test:
1 - Have an OverDrive account setup with SIP authentication
Note: You can apply for a testing account at developer.overdrive.com
and setup an environment
2 - Fill in all your OverDrive system preferences
3 - Test with a patron whose username is their cardnumber
4 - Confirm their overdrive account tab on opac loads
5 - Change the username to be another value like "borked_wont_work"
6 - Note the overdrive account tab won't load
7 - Apply patch, update database, not new system preference
OverDriveUsername (default to 'cardnumber)
8 - Note the OD account loads successfully
9 - Change the system preference to 'user name' - the account load fails
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixed the spelling to follow Koha's capitalization rules to
"Print label".
To test:
- Edit an item in the GUI
- Look at the Actions pull down in the table above
the item form
Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Sponsored-by: Gothenburg University Library
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Run updatedatabase.pl
2. Set sysprefs MarcFieldForCreatorId, MarcFieldForCreatorName,
MarcFieldForModifierId, MarcFieldForModifierName
3. Create a new biblio
4. Verify that the fields are correctly filled
5. Logout and login as another user
6. Modify the same biblio
7. Verify that only the fields for last modifier have been modified
Works perfectly.
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a system preference for cover images from Swedish
book retailer Adlibris. Images are retrieved via http or https
from an external web server. This might leak OPAC and Staff
interface data to third parties and should thus be used with
caution.
Sponsored-By: Halland County Library
Test plan:
Test 1: Test upgrade procedure for clean installation.
Start by removing existing sysprefs, if present:
$ mysql -u kohaadmin -p -D koha
> DELETE FROM `systempreferences` WHERE `variable` LIKE 'Adlibris%';
* Apply this patch which will add a pref file, update the 'syspref'
structure and add an atomic upgrade file.
* Install the update:
Koha$ perl installer/data/mysql/updatedatabase.pl
* Once upgraded and logged in, Select 'More', 'Administration',
'Global Preferences' and finally 'Enhanced content'.
There should be a new option called 'Adlibris'.
The first option should default to "Don't show", if not the
patch is broken.
The second options should show the default URL:
http://www.adlibris.com/se/organisationer/showimagesafe.aspx
If not, the patch is broken.
Test 2: Changing sysprefs
* In the control panel, change the first value from "Don't show"
to "Show" and save the changes. Use MySQL client to inspect changes:
$ mysql -u kohaadmin -p -D koha
> SELECT * FROM `systempreferences` WHERE `variable` LIKE 'Adlibris%';
The column 'value' should now have the value '1', if not the patch
is broken.
Test 3: Apply update to existing data
* Re-execute the installer now that the database has the data already:
Koha$ perl installer/data/mysql/updatedatabase.pl
If any errors occur the patch is broken.
Examine the database contents:
$ mysql -u kohaadmin -p -D koha
> SELECT * FROM `systempreferences` WHERE `variable` LIKE 'Adlibris%';
If the values were overwritten by the installer the patch is broken.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Run updatedatabase.pl when testing
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove the duplicate entry for RoutingListAddReserves
I guess it has been caused by a bad merge resolution conflict
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Sandy Allgood <sandy.allgood@citruslibraries.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds an "IN" option to the AmazonLocale setting, allowing
Indian libraries to use their Amazon Affiliate ID in Koha's links to
Amazon.
To test, apply the patch and run updatedatabase.
- Go to Administration -> System preferences -> Enhanced content.
- Enable the OPACAmazonCoverImages preference.
- Enter a dummy ID in the AmazonAssocTag preference.
- Confirm that you can select "Indian" for the AmazonLocale preference.
- Select "Indian" and save.
- Open a record in the OPAC and confirm that the cover image links to
Amazon.in and includes the ID you entered in AmazonAssocTag.
- Do the same with a record in the staff client.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch introduces the required sysprefs and Koha::ExternalContent::RecordedBooks
Koha::ExternalContent::RecordedBooks - a wrapper around
WebService::ILS::RecordedBooks::PartnerPatron
RecordedBooks* sysprefs
Nothing functional to test with this patch yet.
But you can run the tests that come with it
t/db_dependent/Koha_ExternalContent_RecordedBooks.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes it possible to add an extra column to Z3950 search results.
The system preference AdditionalFieldsInZ3950ResultSearch decides which MARC field/subfields are displayed in the column.
Testing:
I Apply the patch
II Run updatedatabase.pl
ACQUISITIONS
0) Enter a field/subfield in the AdditionalFieldsInZ3950ResultSearch
1) Create a new basket or use an existing one
2) In -Add order to basket-, click "From an external source"
3) Select some search targets and enter a subject heading ex. house
4) Click Search bouton
5) Validate "Additional fields" column with the field/subfield value.
CATALOGUING
0) Shares same syspref as above
1) Go to cataloguing, click New from z3950
2) Fill to result in a successful search
3) Validate column Addition Fields
prove t/db_dependent/Breeding.t
Sponsored-by: CCSR (https://ccsr.qc.ca)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] We add table patron_consent.
It allows for future extension. We could e.g. save consent for newsletter etc.
[2] Add one field to borrower_modifications
Datetime the patron who self-registered, gave consent.
[3] Syspref PrivacyPolicyURL
[4] Syspref GDPR_Policy: enforced, permissive or disabled.
Test plan:
[1] Run the dbrev or do a new install.
[2] Look at the description of the new prefs in Administration.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It is possible to set up circulation rules to limit trapping of holds by pickup library and itemtype.
To make it easier to understand which holds will be trapped in a given circumstance,
it would be nice if we could optionally group holds by pickup library and/or itemtype.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable AllowHoldItemTypeSelection
4) Pick a record and create holds with various pickup libraries and itemtype combinations
5) Enable HoldsSplitQueueNumbering
6) Try the different combinations of HoldsSplitQueue
7) Ensure the hold "arrows" move the items correctly
* Up and down arrows should move hold above or below the adjacent hold within a hold fieldset
* Top and borrom arrows should move hold to the top or bottom within a hold fieldset
Sponsored-by: Stockholm University Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
As requested by RM on Bugzilla comment53.
This pref allows you to always display the link on search results.
Which is the previous behavior ;) It will raise false positives, whereas
the algorithm may result in false positives or negatives (depending on
default item type and circulation rules).
When upgrading the pref is set to always (current behavior), new installs
get the new calc value using the algorithm in may_article_request.
Test plan:
Run t/db_dependent/Koha/IssuingRules/guess_article_requestable_itemtypes.t
Run t/db_dependent/ArticleRequests.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- German language manuals were added since this patch was started
- The structure of the manual was changed slightly, system
preferences were moved into their own chapter
To test:
- Test help files display correctly for system preferences display correctly
Note: Local use uses a different page than the other tabs
- Test German shows up as option in KohaManualLanguage and links
correctly
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
the https version was not working when I wrote the first patches
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some libraries don't wish to require librarians to confirm each hold during checkin. Instead they would like to only be alerted that a hold was filled.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable the new syspref HoldsAutoFill
4) Check in an item that should be trapped for a hold
5) Note that instead of the modal asking if the hold should be filled,
instead you get a message box showing the hold was filled, along
with a button to print the hold slip.
6) Enable the new syspref HoldsAutoFillPrintSlip
7) Repeat step 4
8) Note the same behavior, but this time the print dialog displays
automatically
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The update DB entry will not remove the prefs if NorwegianPatronDBEnable
is set.
This patch could be reverted locally by people using it.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove prefs OCLCAffiliateID, XISBN and XISBNDailyLimit
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The RoutingListAddReserves feature currently doesn't work as
expected (see bug 2894) and should be turned off for new
installations until properly fixed.
To test:
- Run the web installer
- Confirm that RoutingListAddReserves is set to "Don't place"
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Extended patron attributes are a very useful feature that should be
more obvious. We should activate them by default for new installations.
For testing:
- Run the web isntaller on an empty database
- Check that after installation ExtendedPatronAttributes is turned on
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the OPAC interface for API keys management work
with the new lib. Verify all actions work for a logged user.
Users without login should be redirected to an error page.
The AllowPatronsManageAPIKeysInOPAC syspref is added to control if the
OPAC feature is enabled or not.
To test:
- Verify the syspref works
- Verify users can manage their API keys
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Default value of AutoMemberNum is now 0.
TEST PLAN:
0. Do a fresh install of Koha
1. In system preferences AutoMemberNum should be off
2. No warning should be shown next to the cardnumber field in the patron creation form.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As per RM request, changing the shorter name to its full form.
Result of a git grep | sed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No occurrences to be found anymore with git grep -i.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This pref allows you to block changes to superlibrarian privileges at
client and server side for non-superlibrarians.
This patch only contains the db rev and the preference description.
Test plan:
Run dbrev or new install. Check pref value.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The goal to this enhancement is to add the ability to cancel a hold and
mark items as lost from the 'Holds to pull' page.
A new pref is added to control the behaviour, default is off
To mark items as lost you need to set the new pref CanMarkHoldsToPullAsLost to one of these two values:
- "Allow to mark items as lost"
=> The item will be marked as lost and the hold will be cancelled
- "Allow to mark items as lost and notify the patron"
=> Same as previously but the patron will be notified as well.
The notification is done using a new notice template (code=CANCEL_HOLD_ON_LOST).
Feel free to suggest another default wording.
To update the values of the items when one of these 2 buttons are used, you need to
fill the UpdateItemWhenLostFromHoldList with something like: 'itemlost: 1'
Test plan:
1/ Place holds on some items
2/ Go to Home > Circulation > Holds to pull
From here you can cancel the hold or
3/ Mark the items as lost
=> You will receive feedback messages depending on different situations:
* The CANCEL_HOLD_ON_LOST does not exist
* The patron does not have an email address (but the notice has been
enqueued! It is the current behaviour with other notices)
* The notice has been enqueued
* The hold has been cancelled
QA Notes:
From which library do we want to pick the notice? This patch use
reserves.branchcode
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Given the confusion regarding this behaviour it sounds better to make it
configurable.
This pref will take 4 different values, 1 per place an item can be
marked as lost.
Test plan:
Mark items as lost and confirm the item is returned or not, depending on
the value of the system preference.
- from the longoverdue cronjob (--mark-returned takes precedence if set)
- from the batch item modification tool
- when cataloguing an item
- from the items tab of the catalog module
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a new system preference MarcFieldDocURL. Setting it to some URL
will make all the MARC documentation links point to that in
the MARC edit UI. Leaving the value empty will use the old defaults
(http://loc.gov for MARC21 and http://archive.ifla.org for UNIMARC).
There are some possible substitutions usable in the URL:
- {MARC} is replaced with either "MARC21" or "UNIMARC"
- {FIELD} is replaced by the MARC field number, eg. "000", "048", ...
- {LANG} is replaced by the UI language, eg. "en", or "fi-FI"
To test:
1) Go to Cataloguing > New record
2) Clicking on the question mark links in the MARC edit will
open a window to either loc.gov or archive.ifla.org
3) Install patch, run updatedatabase, etc
4) Redo parts 1, and 2.
5) Set the value of MarcFieldDocURL to
http://example.com/?field={FIELD}&marc={MARC}&lang={LANG}
6) Redo parts 1 and 2
7) Clicking on the question mark links in the MARC edit will
open a window to example.com, with the proper substitutions
in the URL for the field, marc flavour and language
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset allows for use of a separate Novelist profile for the
staff client and opac. This allows Novelist to determine links and
special styling for each. Testing is best with novelist credentials,
however, confirming that values are set and used correctly and nothing
is broken should suffice.
To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records on opac and staff client and ensure no changes have been
made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displayed and nothing is displayed if not
7 - Repeat with all staff view options
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Including:
[1] Atomic update to add pref for existing installs
[2] Add new pref to sysprefs.sql for new installs
[3] Add description to authorities preference file.
Test plan:
[1] Run new install or upgrade to add pref.
[2] Check value of pref via System preferences in staff interface.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The ACQ MARC framework is only used for the ‘Item’ block.
This patch add the ability to define biblio fields (!= 995 or 952) to
customize the display of the bibliographic details when ordering.
This new feature is controlled by a new pref:
UseACQFrameworkForBiblioRecords
Test plan:
- Create a new installation to populate the ACQ framework correctly
- Set the pref UseACQFrameworkForBiblioRecords to "Use"
- Create a new order
=> You will see the lib from the ACQ framework
- Add/remove/update biblio subfields in the ACQ framework
- Create a new order
=> You should see the new subfields displayed
Note for QA: I though I would be able to refactor existing code to make
it more flexible, but it is a bit messy and lost a lot of time. I
finally decided to copy/paste the existing code. I simplified it as, I
think, we do not want the plugin, etc. like in the full biblio editor.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In order to make this module unrelated to the SCO module, this
patch introduces the following sysprefs:
- SelfCheckInMainUserBlock
- SelfCheckInModuleUserID
- SelfCheckInTimeout
- SelfCheckInUserCSS
- SelfCheckInUserJS
It also adds a new user flag and sub-permission:
- self_check => self_checkin_module
and moves the circulate => self_checkout permission into
- self_check => self_checkout_module
Descriptions are adjusted accordingly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The system preferences value is used whenever purge_suggestions.pl is called without the 'days' parameter.
This patch uses the preference description suggested by comment #9.
This version should now be cleanly applicable.
I Apply the patch
II Run updatedatabase.pl
a) Run purge_suggestions.pl without the days parameter
- validate that there is an error message
b) Run purge_suggestions.pl with the days parameter
- validate that there is no error message
c) Insert a number of days in the system variable PurgeSuggestionsOlderThan
d) Run purge_suggestions.pl without the days parameter
- validate that there is no error message
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested per plan, all tests pass.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the same feature as bug 10858 for the OPAC interface:
after a search, librarians will be able to browse selected results.
The results can be selected from several pages.
By extension it is possible to add results from several pages to a list
or the cart.
When at least one result is selected, a new "Browse selected records" button
becomes usable and change the behaviour of the existing browser.
The whole feature can be turned off with the pref BrowseResultSelection.
Test plan:
- Launch a search (on the staff interface)
- Check some biblios
- Go on another page
- Check some biblios
- Come back to a page you already check results and confirm that they are
still checked
- Click on the "Browse selected records" button
- Check that you are able to browse results you had checked.
You can also:
- add them to the cart
- add them to a list
QA note: the browsers at the OPAC and the one at the staff interface are completely different
That's why the code is not mimicking what has been done on bug 10858.
The behaviour must stay the same anyway.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With this syspref enabled scanning a patron barcode into the item
barcode field during circulation will redirect you to the patron's
circulation page.
This allows circulation with only a barcode scanner.
Testing:
- Enable the AutoSwitchPatron syspref
- Navigate to a patron's check out screen
- Enter a patron barcode into the "Enter item barcode" field
Result
- Browser should be redirected to the entered patron
Signed-off-by: Joel <aloi54@live.fr>
Followed test plan, patch works as described
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1) Create a new installation
2) On staff go adminisation --> and search EnchancedMessagingPreferences
3) Check that it is automaticaly on allow. If it is the it has worked.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
1)apply patch
2) go into administration --> search for OPACSearchForTitleIn
3) *click to edit*
4) look at the link and read the google scholar one.
5) check that the start link is https://scholar.google.com.
6) http://www.scholar.google is incorrect
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
* installer/data/mysql/atomicupdate/ill_tables.sql: New file.
* installer/data/mysql/kohastructure.sql: Add tables.
* installer/data/mysql/sysprefs.sql: Add sysprefs.
* installer/data/mysql/userflags.sql: Add userflags.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/admin.pref:
Add sysprefs to UI.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mimicking what does BlockReturnOfWithdrawnItems we can easily add a new
syspref to block return of lost items.
This patch adds BlockReturnOfLostItems, if set to 'Block' a item marked
as lost cannot be checked in.
Test plan:
1/ Set BlockReturnOfLostItems to 'Do not block'
2/ Check an item out to a patron
3/ Edit the item and mark it as lost (*)
4/ Check the item in
=> The item is checked in
5/ Edit the item and remove the lost status
6/ Check the item out again
7/ Edit the item and mark it as lost (*)
8/ Check the item in
=> The item is not checked in
(*) There are 2 ways to mark an item lost:
- From the item list view (/catalogue/moredetail.pl?biblionumber=42)
If you set the lost status from this form, the issue will be returned
Maybe this should be optional (?)
- From the edit items form (/cataloguing/additem.pl?biblionumber=42)
It is the form you must use to not mark the issue returned.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Dominic Pichette <dominic@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a summary to the OPAC once the user has logged in that
shows the users number of checkouts, overdues, holds pending, holds
waiting and total fines. We also have a syspref OPACUserSummary to turn
this feature on and off. Default is ON.
To test:
1) Apply patch and update database
2) Set up some checkouts, overdues, holds pending AND waiting and fines
for a user
3) Log into OPAC as that user, see summary. Confirm links all work as
expected
4) Confirm that if there are no checkouts / overdues etc that the link
disappears from the summary
5) Turn OPACUserSummary OFF and confirm the summary does not show on the
mainpage.
Sponsored-by: Catalyst IT
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the OPACShowBarcode syspref in favour of the new
columns settings option introduced by bug 16759.
On the upgrade step, it picks the value for OPACShowBarcode and uses it
to populate the columns_settings table.
To test:
- Verify the upgrade process maintains the current behaviour
Regards
Sponsored-by: Dover
Followed test plan and works as expected. Functionality of patch from bug 16759
appears intact too.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a system preference SCOMainUserBlock to display custom HTML
on the self checkout page.
To test:
- Set up self checkout (see section Self Checkout in Circulaton sysprefs )
- Apply patch
- Update db
- Add some HTML system preference SCOMainUserBlock
- Go to sco page
- Verify that HTML displays on page (logged in and not logged in)
New version based on Koha.Preference TT plugin as of comment #7
Depends on Bug 12691
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames the 'OpacLocationBranchToDisplayShelving' syspref into
'OpacLocationOnDetail' and adds it a fourth option, 'column', that makes
the OPAC display shelving location on a separate column, instead of the
library names (home, holding or both).
Sponsored-by: Dover
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Eivin Giske Skaaren <eivin@sysmystic.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset prevents users to enter too leak password, controlled by
a new syspref RequireStrongPassword. If set the staff and patrons will have
to enter a strong password.
The strongness cannot be modified, it has been arbitrarily set (by the
author of this enhancement) to at least 1 lowercase, 1 uppercase and 1
digit. This can be inforce by increasing the value of the existing
minPasswordLength pref.
I decided to turn this feature on, it cannot hurt! For existing installs
it will have to be turned on manually.
Writing these patches I found a lot of inconsistencies all around the
password checks and decided to refactor everything to make things
consistent and more robust.
Now the password validity is check at only one place (subroutine
covered by tests).
Test plan:
We have several places where a password can be change/created:
a. Editing a patron (members/memberentry.pl)
b. Changing the password of a patron (members/member-password.pl)
c. Changing your own password at the opac (opac/opac-passwd.pl).
OpacPasswordChange needs to be set
d. Reseting your own password at the opac
(opac/opac-password-recovery.pl). OpacResetPassword needs to be set,
see "Forgot your password?" link when you are not logged in
e. Self registration feature, PatronSelfRegistration needs to be set.
You will also need to add 'password' to PatronSelfRegistrationBorrowerMandatoryField.
Note that '****' is considered by Koha internally that the password is
not changed (existing behavior).
To fully test this patch you will need to test the different
combinations of RequireStrongPassword and minPasswordLength.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1) Insert some value to staffBaseURL preference, without starting http://
2) Apply the patch
3) Update database
4) Go to system preferences adminsitration, find the staffBaseURL
preference, the inserted value should be prepended with 'http://' and
the comment should be "This should be a complete URL, starting with
http:// or https://. Do not include a trailing slash in the URL. (This
must be filled in correctly for CAS, svc, and load_testing to work.)"
5) prove t/db_dependent/Auth_with_cas.t
6) prove t/db_dependent/selenium/basic_workflow.t
7) prove t/db_dependent/check_sysprefs.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This syspref is going to be used for populating field 008, range 15-17
with a desired default. It is currently hardcoded to 'xxu'. If not set,
it will still fallback to 'xxu'.
Signed-off-by: m23 <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a language selector menu to the top menu of staff client
similar to the OPAC.
Display of language selectors at top, bottom or both can be configured
with system preference StaffLangSelectorModer. It defaults to bottom.
To test:
- Apply patch
- Udate database
- Restart plack and memchached
- Go to staff client, verify that language selector displays at
the bottom of the page (as before)
- Go to system preferences, verify that there is a new preference
StaffLanguageSelectorMode (name similar to the sypref ror OPAC), and
that it is set to 'footer'
- Change mode for top, both and footer and verify, go to staff client
and verify for each that the language selector displays as appropriate
(Amended for comment #2 2017-06-02 mv)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds the missing system preferences for a fresh install.
Signed-off-by: Eugene Jose Espinoza <eugenegf@yahoo.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
And of course deletedborrowers.login_attempts
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Apply patch and update database
2) Go to system preferences. Default value should be 20 reports.
3) Go to Reports -> Use saved. Confirm 20 results are showing
4) Change value in syspref to any integer (i.e. 50)
5) Go back to Reports -> Use saved. Confirm the number of results shown
is based on the value in the syspref.
Sponsored-by: Catalyst IT
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Janet McGowan <janet.mcgowan@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This whole patch set adds the ability to translate notices in different
languages.
That way, if a library has patrons from different countries, they will
not have to send the notices in only one language but they will be able to
translate them.
Test plan:
- Switch on TranslateNotices
- Translate the interface in different languages
- Edit patron's details
=> You should see a new "prefered language" entry
That language will be used to send notices to this patron
- Edit several notice templates
=> You should see different tabs, 1 tab per language translated at the
opac (which sounds to make sense)
- Now the notice generated for this patron should be the one translated
in the language picked for him
To confirm that, try to generate several notices for this patron.
If the notice is not translated, the default one should be used.
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes koha automatically set expiration date when reserves become
waitting. Also it adds a new syspref "ExcludeHolidaysFromMaxPickUpDelay" that allows to
take holidays into account while calculating expiration date.
Test plan:
- Install this patch and run updatedatabase.pl script,
- allow ExpireReservesMaxPickUpDelay in system preferences,
- set ReservesMaxPickUpDelay to 5.
- Place an hold on a checked out item and check in this item:
The hold's expiration date should be today + 5.
- Allow ExcludeHolidaysFromMaxPickUpDelay in system preferences,
- add holiday during this pickup delay period,
- Create a new hold and make it comes waitting:
The hold's expiration date should be today + 5 + number of closed
day(s).
Also:
- Check that ExpireReservesOnHolidays syspref works again
without ExcludeHolidaysFromMaxPickUpDelay.
- Check that cancel fees apply again if wanted.
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Liz Rea
Nick Clemens
Owen Leonard
Katrin Fischer
Kyle M Hall
Marcel de Rooy
Björn Nylén
Chris Cormack
Josef Moravec
Andrew Isherwood
Martin Renvoize
Tomas Cohen Arazi
Alex Buckley
Alex Arnaud
Baptiste Wojtkowski
morgane alonso
David Gustafsson
Julian Maurice
Martin Persson
Aleisha Amohia
Jonathan Druart
Alex Sassmannshausen
Srdjan
David Bourgault
Pasi Kallinen
remi
Chad Billman
Charlotte Cordwell
Marc Véron
charles
Mark Tompsett
Lari Taskula